Damanox VG10 - Stainless Damask plate with a core of VG-10
Tax included.
Det er risikofritt å handle hos oss
Tusenvis av fornøyde kunder
Rask levering
(1-3 dager)
Kjøp nå,
betal senere
Finally, you can make your own knives from scratch with stainless laminated damask!
Realize your vision with 67 layers of damask, with a core of Japanese knife steel VG-10, known from premium kitchen knives, but this steel is produced at a Chinese steel mill.
The pattern you get comes in 4 variations.
We have large plates without embossing, and 3 smaller variants finished with a pattern.
Hardening
The steel is delivered unhardened and ready for drilling, filing and grinding.
Curing temperature 1050-1100 degrees
Tempering: 2x2 hours at 150-250 degrees
Tips and tricks
The steel has hardenable and good edge steel (VG10) surrounded by tough stainless steel that does not harden. This gives you the advantage of a hard edge and a tough blade. It also makes sharpening easy after hardening.
With thin blades, it is advantageous to do the sharpening after hardening because a thinly sharpened blade is very vulnerable to damage, excessive temperature or warping during heating and cooling.
Raindrop, Dragonskin, Beach and Laminar
The three patterns Raindrop, Dragonskin and Beach are embossed in a special press to slightly bend the steel layers so that the differences between layers are revealed when the knife blade is sharpened. Laminar is completely flat and smooth, and it is the basis for the other three unique patterns before pressing. You can use it as is for a topographic parallel line effect, or you can modify the pattern with a hammer or press to create your own pattern.
Do you have any questions?
If you have any more questions about this steel, contact us now!
We look forward to seeing your results!
Feel free to send us pictures of your projects with Damanox!
Vi sender bortimot alle bestillinger samme virkedag hvis du bestiller før kl. 14.00.
Vanlig leveringstid: 1–3 virkedager med Bring.
Kunder i Nord-Norge kan ta en dag eller to ekstra i noen tilfeller.
Sporing:
Du mottar sporingsnummer på e-post så snart pakken er sendt.
100 % fornøydgaranti:
Vi er helt sikre på at du blir fornøyd. Vi er så sikre at vi tilbyr både full retur og dekking av returfrakt. Uansett. Det er altså helt uten risiko for deg å bestille nå for å inspisere produktet selv i eget hjem og eget tempo.
Vi lagerfører også reservedeler og slitedeler, slik at om du skulle være uheldig å ødelegge noe eller mot formodning greie å slite ut brynene så kan disse enkelt erstattes.
Enkel retur:
Kontakt oss på kundeservice, så sender vi deg en ferdig utfylt returetikett.
Ingen spørsmål – ingen risiko
Beskrivelse:
Finally, you can make your own knives from scratch with stainless laminated damask!
Realize your vision with 67 layers of damask, with a core of Japanese knife steel VG-10, known from premium kitchen knives, but this steel is produced at a Chinese steel mill.
The pattern you get comes in 4 variations.
We have large plates without embossing, and 3 smaller variants finished with a pattern.
Hardening
The steel is delivered unhardened and ready for drilling, filing and grinding.
Curing temperature 1050-1100 degrees
Tempering: 2x2 hours at 150-250 degrees
Tips and tricks
The steel has hardenable and good edge steel (VG10) surrounded by tough stainless steel that does not harden. This gives you the advantage of a hard edge and a tough blade. It also makes sharpening easy after hardening.
With thin blades, it is advantageous to do the sharpening after hardening because a thinly sharpened blade is very vulnerable to damage, excessive temperature or warping during heating and cooling.
Raindrop, Dragonskin, Beach and Laminar
The three patterns Raindrop, Dragonskin and Beach are embossed in a special press to slightly bend the steel layers so that the differences between layers are revealed when the knife blade is sharpened. Laminar is completely flat and smooth, and it is the basis for the other three unique patterns before pressing. You can use it as is for a topographic parallel line effect, or you can modify the pattern with a hammer or press to create your own pattern.
Do you have any questions?
If you have any more questions about this steel, contact us now!
We look forward to seeing your results!
Feel free to send us pictures of your projects with Damanox!